11
When a valid user code is received, followed by # in your phone (# is the Enter key),
the control panel acknowledges it by a special tune. Otherwise an error tune is
sounded. Note: Arming the “D” control panel by the remote user via DTMF is
possible even when zones are troubled.
Remote DTMF feature requires telephone line without fax or similar
connected to.
After the control panel acknowledges the user code, it will stay ON-LINE no longer
than 3 minutes, providing enough time for the user to perform various operations.
If the panel does not detect activity, it will shorten the ON-LINE time and eventually
will hang up.
When the control panel calls your phone during alarm, it will first generate the siren
sound for about 30 seconds (to shorten time ask your installer). The siren sound will
stop 10 seconds before the end of the call and a greeting tune will be sounded, after
the greeting tune, enter your code followed by #. To stop the dialer enter 6 #, to get
panel status (armed or disarmed) enter 7 #, to arm the panel enter 1 #, to disarm the
panel enter 2 #. To end the process press 9 #. To Activate a home appliance (requires
hardware and programming) press 3
#.
To learn different tunes, call your system and use 8 X # (X is the function number):
1 - Greeting tune. It will be heard only once, after the control panel answers the call
(or calls the user). It indicates that the panel expects a valid user code.
2 - "User code" accepted.
3 - "Error" - Will be sounded in the following cases: Incorrect User code, Command
not defined/valid, incorrect input, trying to bypass an undefined zone, Command
could be not carried on, on-line time out, call ends.
4 - "Confirmation" - Will confirm that the requested action has been carried on.
5 - "Armed"- Control panel is Armed.
6 - "Disarmed" - Control panel is Disarmed.
7 - "Alarm On" - Control panel is in Alarm position. This warning will be sounded
from time to time during idle periods.
Remote DTMF function example
For example, let’s assume that your kid arrived home and cannot disarm the alarm
panel.
)
Call your alarm telephone number (tell the kid not to pick up the phone)
)
After few rings, your system answers; greeting tune is heard
)
Enter your user code; 1 2 3 4 # (# is equivalent to
Æ
Enter)
)
Confirmation tune is heard, if alarm is on, siren tune is heard
)
Press 2 #; wait for the confirmation tune
)
To re-check the system status press 7 #; wait for the system status tune
In case the system is still on, re-enter 2 # or try to enter your user code then 2 #
(40 Seiten)
(1 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern